An electric bike conversion kit from Yose Power UK is one of the most cost-effective ways to turn an ordinary bicycle into a pedal-assist e-bike without buying a whole new ride. With the right components, most standard bikes can be converted in an afternoon using basic tools. This guide walks you through every buying decision so you can get rolling with confidence.
What Is an Electric Bike Conversion Kit?
A cycle conversion kit replaces your front or rear wheel with a hub-motor wheel, then pairs it with a battery, controller, and display. When you pedal, the motor assists your effort up to the speed limit set by the controller. The result is a bike that feels like a natural extension of your legs, only with far less sweat on hills.
Yose Power UK offers several versions to suit different bikes and budgets:
- electric bike conversion kit - the core hub-motor wheel kit, sold without a battery, ideal if you already own a compatible pack
- converter electric bike - a fully configured bundle aimed at first-time converters
- ebike kit with battery - everything in one box including the battery, the fastest way to get started
If you want the simplest path from box to road, the ebike kit with battery removes the guesswork of matching separate components.
Choosing the Right Motor Voltage and Battery
Voltage is the single biggest performance variable in any e-bike build. Here is a quick comparison of the two most common options in the Yose Power UK range:
| Spec | 36 V Setup | 48 V Setup |
|---|---|---|
| Typical use case | Commuting, light hills | Hilly terrain, heavier riders |
| Range feel | Moderate | Extended |
| Weight | Lighter pack | Heavier pack |
| Example product | 36v li ion | 48v 20ah battery |
The 36v li ion battery suits most urban riders who cover moderate distances on relatively flat ground. If your route involves long climbs or you carry cargo, the 48v 20ah battery delivers noticeably more torque and a larger capacity buffer. Check the latest pricing and use our Yose Power UK discount code to save £10 on either option.
PAS Sensors: Hollowtech 1x1 vs 34T
A pedal-assist sensor (PAS) is the small ring that clips to your bottom bracket and tells the controller when you are pedalling. Getting the right fit matters because an ill-fitting sensor can produce jerky, uneven assistance.
Yose Power UK stocks two variants:
- pas sensor hollowtech 1x1 - designed for Shimano Hollowtech II cranks with a single chainring, common on modern commuter and gravel bikes
- pas sensor hollowtech 34t - a 34-tooth magnet ring version suited to bikes where the sensor mounts directly to the chainring
How to choose:
- Remove your crank arm and check whether your bottom bracket is a Shimano Hollowtech II external type.
- If your existing chainring is 34 teeth, the 34T variant slots in cleanly.
- For any other Hollowtech II setup, the 1x1 is the safer choice.
- Both sensors use the same cable connector standard, so swapping later is straightforward.
A correctly installed PAS sensor makes the difference between a conversion that feels smooth and natural and one that surges unpredictably, so do not skip this step.
Keeping Your Battery Charged: Charger Options
Batteries are the most expensive component in any conversion, so using the correct charger protects your investment. Yose Power UK offers two charger types:
- 3 pin battery charger - a standard UK three-pin plug charger compatible with the Yose Power lithium packs
- bosch 36v battery charger - for riders who already own a Bosch 36 V battery and want a compatible charging solution
Charger care tips:
- Always charge on a hard, non-flammable surface away from direct sunlight.
- Unplug once charging is complete; lithium cells do not benefit from trickle-charging.
- Store the battery at around 50-80% charge if the bike will sit unused for more than two weeks.
- Never use a charger with a damaged cable or housing.
Step-by-Step: Installing Your Conversion Kit
The process below applies to a standard rear-hub kit from the Yose Power UK range:
- Remove the existing rear wheel and deflate the tyre fully before unseating the bead.
- Transfer the tyre and tube onto the new hub-motor wheel, then inflate to the recommended pressure printed on the tyre sidewall.
- Refit the wheel and tighten the axle nuts or quick-release to the torque specified in the kit instructions.
- Mount the controller to the frame or under the saddle using the supplied straps.
- Install the PAS sensor at the bottom bracket, aligning the magnet ring with the sensor head (1-3 mm gap is typical).
- Route and connect all cables - most Yose Power kits use colour-coded connectors that only mate in one direction.
- Mount the battery on the down tube or rear rack, depending on your kit configuration.
- Power on and test at low speed in a safe area before your first real ride.
If you are new to bike mechanics, the cycle conversion kit includes a detailed instruction sheet and access to Yose Power UK customer support, which community reviews consistently highlight as responsive and helpful.
Who Is This Conversion Best Suited For?
The Yose Power UK range is a strong fit if you:
- Own a working bike in good mechanical condition and want to avoid the cost of a purpose-built e-bike
- Commute regularly and want pedal assist for hills or longer distances
- Prefer to control your own component choices (motor voltage, battery capacity, sensor type)
- Want Yose Power UK warranty cover and straightforward returns without dealing with an overseas grey-market seller
Riders who want a completely plug-and-play experience should lean toward the ebike kit with battery, while those with existing Bosch batteries will find the bosch 36v battery charger a handy add-on. For Yose Power UK money-saving tips and the current £10 off promotion, visit our Yose Power UK discount code page before you check out.
Frequently asked questions
Which electric bike conversion kit works with a standard 700c road bike?
Most Yose Power UK hub-motor kits are available in 700c sizing, so they fit standard road and hybrid frames directly. Check the product listing for wheel size options before ordering to confirm compatibility with your dropout spacing.
Do I need a PAS sensor if the kit already includes a throttle?
A throttle lets you apply motor power without pedalling, but a PAS sensor gives the more natural, cadence-linked assistance that most UK riders prefer and that keeps the bike road-legal under EAPC rules. Many Yose Power kits support both, so you can fit the pas sensor hollowtech 1x1 or 34t version and still keep a throttle as a backup.
What is the difference between a 36 V and 48 V battery for a conversion?
A 36 V pack like the 36v li ion is lighter and sufficient for flat urban commuting, while a 48 V pack such as the 48v 20ah battery provides more torque and a larger energy reserve for hilly routes or heavier loads. Both voltages require a matched charger and controller, so do not mix voltage components.
Can I use the Bosch 36V battery charger with any lithium pack?
No. The bosch 36v battery charger is designed specifically for Bosch 36 V battery systems and uses a proprietary connector. Using it with a non-Bosch pack risks damaging the battery or charger, so always match the charger to the battery brand and voltage.
Does Yose Power UK offer free delivery or a returns policy?
Yose Power UK ships to UK addresses and has a published returns policy covering faulty or incorrectly supplied items. Check the store page for current delivery thresholds and terms, as these can change with promotions.
Is there a discount code available for Yose Power UK orders?
Yes, we maintain an up-to-date code on our Yose Power UK discount code page that currently offers £10 off all orders. Visit the page just before checkout to copy the latest code and apply it to your basket.