Which Carrying Strap Fits an RPG Launcher? Sizing and Fit Guide

# Which Carrying Strap Fits an RPG Launcher? Sizing and Fit Guide

If you've been searching for an rpg launcher strap, you already know the problem: launchers are heavy, awkward, and anything but ergonomic. Whether you're kitting out a replica, a display piece, or an airsoft-scale model, the carrying strap you choose makes the difference between comfortable transport and a shoulder full of regret.

In this guide, we'll walk through how to measure, size, and fit an rpg launcher strap, and which hardware from RigCraftor's range actually works for the job.

Why a Standard Strap Rarely Works

Launchers — and launcher-shaped replicas — are nothing like rifles. They're long, tube-heavy, and unbalanced. A standard rifle sling attaches at two narrow points and immediately fights you. What you need is:

• Wide webbing (38–50 mm) to distribute weight across the shoulder
• Heavy-duty load rating — think industrial strapping territory, not fashion lanyards
• Adjustable length of at least 900–1,400 mm, because launcher carry positions vary wildly
• Reinforced attachment points that won't rotate or fray against tube surfaces

That's why the purpose-built rpg launcher strap is the best starting point. It's designed around tube-frame geometry, with wide padded webbing and adjustable anchoring that handles unbalanced loads far better than generic slings.

Measuring Your Launcher for a Strap

Before you order, grab a tape measure and note three numbers:

1. Circumference of the tube at your intended front anchor point (most straps wrap or clamp here)
2. Distance from front anchor to rear anchor along the body
3. Your preferred drop length — how far below your shoulder you want the launcher to sit

Add roughly 15% to your measurements to account for webbing wrap-around and hardware. If your launcher has an odd profile or non-standard fittings, the rpg launcher strap includes extended wrap points that accommodate tube diameters most off-the-shelf slings can't.

Fitting the Strap: Step by Step

1. Anchor the front point first. Wrap the webbing snugly around the tube or mounting rail — two full wraps minimum for grip.
2. Set the rear anchor. This carries most of the load, so double-check the buckle seat and stitching.
3. Adjust for carry angle. A launcher carries best angled slightly nose-down; shorten the front section a touch to achieve this.
4. Test with weight. Load the launcher (or ballast it with an equivalent weight) and walk around. If it swings, tighten the front segment; if it digs into your neck, widen the shoulder pad or lengthen the drop.

Heavy-Duty Hardware That Pairs Well

Because launcher-scale loads are closer to cargo than to firearms, several industrial-grade RigCraftor tools are worth keeping in your kit:

• strap gun — the tensioning tool for cinching webbing to spec, ensuring your anchor wraps stay tight under movement.
• pneumatic strap launcher — for fast, consistent strap tensioning when you're fitting multiple rigs or working with stiff polyester webbing.
• strap winch winder — ideal for rewinding and storing long lengths of strap without kinks that weaken anchor wraps.
• strap winder for drill — a drill-powered winder that saves your wrists when you're re-rolling heavy webbing after a fit session.

For excess strap tail after fitting, a stevedore hook can secure the loose end cleanly and keep it from flapping during carry.

Storing and Transporting the Whole Setup

A fitted launcher is one thing; moving it safely is another. If you're hauling gear between sites:

• lorry steps make loading tall or awkward loads into trucks far safer.
• A flatbed trailer ladder gives you stable access when strapping gear down on trailer decks.
• For rail-side transport scenarios, a railway ladder and a sturdy ladder train setup keep access equipment organised on long hauls.

Common Fitting Mistakes to Avoid

• Overtightening at the front anchor. It deforms soft webbing wraps and creates a pivot point that makes the launcher swing.
• Using the rear anchor as the only support. Dual-point carry is what keeps the load balanced.
• Ignoring webbing material. Nylon stretches; polyester holds. For a heavy launcher, polyester webbing (as used on the rpg launcher strap) is the safer bet.
• Skipping the load test. Always simulate carry weight before relying on the fit.

Save on Your Setup

RigCraftor is currently running 5% OFF All Orders — grab the code on the RigCraftor discount page before you check out on your strap, tensioning tools, and accessories.

Final Verdict

For a proper rpg launcher strap fit: measure your anchor points, allow 15% for wrap, use wide polyester webbing, and tension your wraps with a proper tool like the strap gun. The purpose-built rpg launcher strap from RigCraftor solves 90% of the fit problems in one purchase — and with 5% off all orders, there's rarely been a better time to gear up.